Organic Wool PillowWritten from the fleece forward

A machine-washable wool pillow, and what the treatment trades away

If you need to machine-wash the whole pillow, your specification is a treated, shrink-resist wool fill, because untreated wool felts in a washing machine. The treatment does its job. It also changes the fibre's surface, rules out the GOTS organic label, and still needs a cool, gentle cycle.

Updated .

In short: Choose shrink-resist treated wool in a zipped cover, and accept a smoother fibre, no GOTS organic label and a cool, gentle cycle.

The construction

These figures come from published wool standards and makers' stated specifications. No wool was weighed or measured for this page.

RowSpecification
ConstructionShrink-resist treated wool in a zipped cover, so you can adjust the fill. Chlorine-Hercosett is used on approximately 75% of all superwash-treated wool (source).
Fill weightPublished standard-size fills range from 1.4 lbs (source) to 2.5 lbs for a 20x26in (51 x 66cm) pillow (source).
Fibre micron bandOne bedding maker states bedding wool performs best at a minimum of 30 micron, ideally around 33 (source). Most wool between 11.5 and 24 microns goes into clothing (source).
Scent timelineOne seller states about 1% of the lanolin stays in the wool after cleaning, and any smell usually fades within a few days of airing (source).
CareOne maker's published care: machine wash cold on a gentle cycle with reduced agitation, then machine dry on an air cycle (source).

Why the wool answer lands here

Your cleaning answer decides this page. One maker of washable pillows states that moisture, heat and movement in the washing machine will cause wool to felt and shrink (source). The guide on why a wool pillow felts explains how that happens. So the specification starts from treated wool.

The cost sits on the fibre surface. Chlorination strips the natural fatty coating that helps wool shed water and etches away the edges of the scales, and a review of shrink-resist methods notes that this changes how the fabric feels (source). The treatment also has an environmental cost. The usual method, Chlorine-Hercosett, is used on approximately 75% of all superwash-treated wool (source). A peer-reviewed study of anti-felting treatments reports that effluent from a continuous chlorine Hercosett line contains 35–40 mg/l AOX, which means chlorinated organic compounds in the waste water.

The other answers tune the details rather than the fibre. Washable fills are often sold as balls, which give the soft, squashy feel. If you chose firm and even, look for washable batting instead; the guide to batting, balls and shredded wool compares them. If you wake hot, wool still helps, because the fibre takes up moisture vapour from your skin and the heat leaves with the damp. The moisture guide explains what that means at night. On dust mites, count washing as the practical gain rather than a property of the fibre. One seller states about 1% of the lanolin stays in the wool after cleaning (source), so smell-sensitive sleepers should air the pillow before first use.

When the wool fill would change

Three other answers change this. If you can wash the cover and only air the fill, untreated wool becomes an option again, and its scales stay intact.

If you want a GOTS organic label, chlorine-treated wool is out, because the Global Organic Textile Standard lists chlorination of wools as prohibited. Wool shrink-proofed with the Naturetexx Plasma process can still be certified organic by GOTS (source). The guide to what organic wool certifies explains the gap.

If firmness matters more than washing, the fill type comes first, since batting holds an even shape between fluffs in a way loose balls do not.

Testing wool height on your bed

Start with your care label. Some pillows sold as washable expect the owner to take the wool out and wash only the cover, and that is not the pillow this result describes.

Then lie in your usual position for 10 minutes. The neck should sit level with the spine, neither tipped up nor dropping, and side sleepers need more height. Add or remove fill through the zip in small handfuls, then lie down again. Give it a few nights before judging.

After the first wash, the pillow needs to dry completely before anyone sleeps on it. Then check for lumps and compare the height with how it sat on the first night. If it has dropped, add fill until your neck sits level again. If it clumped, wash it colder and with less agitation next time.

More about wool pillows

Back to choosing a wool pillow

Sources

Here are the pages, papers and shops this wool guide draws on, each named beside the question it answers.

  1. source (manteco.com), drawn on in “The construction”; “Why the wool answer lands here”.
  2. source (thewoolroom.com), drawn on in “The construction”.
  3. source (allergystore.com), drawn on in “The construction”.
  4. source (thewoolroom.com), drawn on in “The construction”.
  5. source (en.wikipedia.org), drawn on in “The construction”.
  6. source (turmerry.com), drawn on in “The construction”; “Why the wool answer lands here”.
  7. source (thewoolroom.com), drawn on in “Why the wool answer lands here”.
  8. source (sciencedirect.com), drawn on in “Why the wool answer lands here”.
  9. peer-reviewed study of anti-felting treatments (sciencedirect.com), drawn on in “Why the wool answer lands here”.
  10. Global Organic Textile Standard (global-standard.org), drawn on in “When the wool fill would change”.
  11. source (farmfiberknits.com), drawn on in “When the wool fill would change”.