Layered wool batting, for a firm pillow that keeps its shape
Your answers point to a pillow built from layered sheets of wool batting, filled firm, aired in the sun and never machine-washed. It holds the same height all night. It does ask for some patience in the first fortnight, while the scent of lanolin, the sheep's own natural oils, fades and the layers settle.
Updated .
In short: A batting pillow is sheets of carded wool stacked firm and even; air it in the sun, wash only the cover, and refluff it often.
The construction
| The construction | What to look for | Source |
|---|---|---|
| Construction | Flat sheets of carded wool batting, stacked and sewn into a cotton casing, rather than loose balls or shreds | Batting, balls and shredded wool compared |
| Fill weight | One mill states Standard 20"x26" 2 lbs wool fill, and one maker lists Standard Extra Thick - 20" x 25", 33 oz. | Mill product page; maker product page |
| Fibre micron band | Coarser than clothing wool. Most wool between 11.5 and 24 microns in fibre diameter is made into clothing, while one bedding maker states that bedding wool performs best at a minimum of 30 micron, ideally around 33 micron | Wool measurement; maker's stated figure |
| Scent timeline | One maker says about 1% of this lanolin is left in the wool and that the smell usually fades within a few days as the pillow airs out | Maker product page |
| Care | Wash the cotton cover and air out the wool filling every few months | Maker product page |
These figures come from makers' stated specifications and published wool references. No wool was weighed or measured for this page.
Why the wool answer lands here
Firm and even is the answer that decides the construction. Batting is wool carded into flat sheets, and stacking those sheets gives a pillow with no lumps to chase around. Loose fill shifts under a sleeping head, while sewn layers stay put. The guide to batting, balls and shredded wool compares the three builds directly.
The heat answer adds a reason without changing the build. Wool takes up the moisture vapour coming off your skin, and the heat leaves with that damp, so your head stays cooler and drier. The IWTO states that wool can absorb up to 35% of its weight in moisture vapour, which is how much damp the fibre can carry away. That helps most on nights when you wake hot. The moisture guide explains what the figure means for a pillow at night.
The dust answer needs a plain reading. In the Melbourne House Dust Mite Study70049-6/fulltext>), sheepskin, wool, and cotton mattress coverings carried far more mite allergen than impermeable encasements, at 113 micrograms per gram of dust on wool against 0.4. Wool is not a mite barrier. If mites worry you, the encasement made the difference in that study, and the fibre did not.
The cleaning answer fits as well. Batting is looked after by airing rather than washing, because warm water and rubbing make wool fibres lock together and felt. The felting guide covers the handling that prevents it.
When the wool fill would change
A different firmness answer changes the build. If you want a pillow you can reshape, loose wool balls or shredded wool let you add or remove fill, and stitched batting does not. If you need to machine-wash the whole pillow, untreated batting is the wrong fill.
Sleeping position moves the fill weight while the layers stay the same, since side sleepers usually need more height than back sleepers. The micron band rarely moves, because bedding wool sits above clothing grades for its spring; the micron guide reads a spec line by line.
If you think the smell would keep you awake, air the pillow outdoors for a few days before first use. The scouring guide explains how much of the sheep's own lanolin oils stays in after washing at the mill. Sun is the traditional method, but some wool makers advise shade, warning that prolonged exposure can cause the wool to fade or weaken. Short sessions are a safe middle course.
Testing wool height on your bed
Judge the height lying in your usual position, not sitting on the edge of the bed. Your neck should feel neither propped up nor dropped, with your head in line with your spine. Ask someone to look from the foot of the bed.
Give it a few weeks before deciding. One maker says its pillow will settle over time with the weight and heat of your head and states that this type may settle between approximately 15-30%, according to its product page. If it has settled too low by then, a heavier fill is the fix, and if it still sits too high, a thinner build of the same layers is.
Press a palm into the centre each morning. It should spring back evenly. A dip that stays put means the layers are packing down, and an afternoon of airing is the first thing to try.
More about wool pillows
- What is the difference between wool batting, wool balls, and shredded wool in a pillow?
- Why does crimp make wool work in a pillow?
- Why does a wool pillow felt, and can you wash one without it?
Back to choosing a wool pillow
Sources
Here are the pages, papers and shops this wool guide draws on, each named beside the question it answers.
- Mill product page (ceceswool.com), drawn on in “The construction”.
- maker product page (ecocarmel.com), drawn on in “The construction”; “Testing wool height on your bed”.
- Wool measurement (en.wikipedia.org), drawn on in “The construction”.
- maker's stated figure (thewoolroom.com), drawn on in “The construction”.
- Maker product page (turmerry.com), drawn on in “The construction”.
- IWTO states that wool can absorb up to 35% of its weight in moisture vapour (iwto.org), drawn on in “Why the wool answer lands here”.